Sorting Load; Loading The Dryer; Check The Lint Filter Before Every Load - LG DLHX4072 Serie Manual Del Propietário

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.

Sorting load

fabric care labels
Most articles of clothing feature fabric care labels that
include instructions for proper care.
fabric care labels
Tumble
Tumble
dry
dry
Dry
Normal
Dry
Normal
Gentle/
Do not tumble dry
Gentle/
Do not tumble dry
delicate
delicate
Heat
setting
High
Medium
grouping similar Items
For best results, sort clothes into loads that can be dried
with the same drying cycle.
Different fabrics have different care requirements, and
some fabrics will dry more quickly than others.

Loading the Dryer

warnIng
w
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
• Check all pockets to make sure that they are
empty. Items such as clips, pens, coins, and keys
can damage both your dryer and your clothes.
Flammable objects such as lighters or matches
could ignite, causing a fire. Failure to do so can result
in fire, explosion, or death.
• Never dry clothes that have been exposed to oil,
gasoline, or other flammable substances. Washing
clothes will not completely remove oil residues.
Failure to obey this warning can result in fire, explosion,
or death.
notE
loading tips
• Combine large and small items in a load.
• Damp clothes will expand as they dry. Do not
overload the dryer; clothes require room to tumble
dry properly.
• Close zippers, hooks, and drawstrings to prevent
these items from snagging or tangling on other
clothes.
Permanent Press/
Permanent Press/
wrinkle resistant
wrinkle resistant
Do not dry
Do not dry
(used with
(used with
do not wash)
do not wash)
Low No heat/air
Check the lint filter before every
load
Always make sure the lint filter is clean before starting a
new load; a clogged lint filter will increase drying times.
To clean, pull the lint filter straight up and roll any lint off
the filter with your fingers. Do not rinse or wash the filter
to remove lint. Push the lint filter firmly back into place.
See Regular Cleaning for more information.
Always ensure the lint filter is properly installed before
running the dryer. If the lint filter is not properly
installed, the error code F0 will display when the Start/
Pause button is pressed. Make sure the lint filter is fully
inserted into the filter housing.
33
how to UsE
Lint
Filter