Specifications - Alpine CDA-9847 Manual De Operación

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
PICKUP
Wave length
Laser power
GENERAL
Power Requirement
Power Output
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 2 V/10 k ohms
Bass
Treble
Weight
All manuals and user guides at all-guides.com
87.7 – 107.9 MHz**
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
530 – 1,710 kHz**
22.5 µV/27 dB
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
795 nm
CLASS I
14.4 V DC
(11–16 V allowable)
18 W RMS × 4*
+ 20 dB/– 14dB at 100 Hz
± 14 dB at 10 Hz
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
• Due to continuous product improvement, specifications and design
are subject to change without notice.
** When you choose AREA 2 in the section "Changing the Radio
Frequencies for each Country" (page 7), the tuning range is as
follows:
FM: 87.5 – 108.0 MHz
AM: 531 – 1,602 kHz
178 mm (7")
50 mm (2")
160 mm (6-1/4")
170 mm (6-11/16")
46 mm (1-13/16")
18 mm (11/16")
27
-EN