Sim2 Multimedia C3X Lumis HOST Manual De Uso E Instalación página 28

C3X Lumis HOST
APP.2 INSTALLATION INSTRUCTION (VERTICAL SHIFT)
To install the C3X Lumis HOST system correctly place the projector so that the projected image completely fills the
screen. Ideally, to avoid image distortion, the projector should be positioned perfectly perpendicular to the projec-
tion screen, as shown in the figure below. The centre of the projection lens should be lined up with the centre of the
projection screen.
Sreen
Lens projection center
Screen
Center= 0
Height
Projection Distance
VERTICAL SHIFT (ASSUMING 0% OFFSET)
0 % O set
Screen
Center= 0
Height
Floor Installation
CAUTION:
The examples shown in the figure give only general indication on the use of the vertical shift. Each projection
lens may require differing vertical shift settings. For more detailed information, see the technical specifications
or contact an authorised SIM2 Multimedia centre.
4