D
12. Fold back the footwell mat (1).
13. Disassemble the cover (2) by removing the slat expanding rivet (3).
E
14. Disconnect the air connection (1) of the vehicle from the adapter bridge (4) by squeezing the clip (2)
together and pull off the air connection (1).
15. Disconnect the electrical plug connection (3) from the adapter bridge (4).
16. Loosen and remove the screws (5) on the adapter bridge (4).
RECARO Automotive Seating
1 Footwell mat
2 Cover
3 Fir tree slat expanding rivet
1
Air connection
2 Clip air connection
3 Electric plug connector
4 Adapter bridge
5 Screws
Page 10