Fitting The Adapter Bridge In The Seat Adapter - RECARO C 6000 MB ACTROS 4 Instrucciones De Montaje

3.6

Fitting the adapter bridge in the seat adapter

I
1.
Mount the electrical connection (6) and the air connection (7) of the hose/cable harness adapter
supplied in the installation kit in the adapter bridge (1).
2.
Screw the adapter bridge (1) onto the seat adapter (2) using the original screws (3) that you removed
earlier.
3.
AROCS: Use the cable tie (4) from the installation kit to secure the cable harness (5) in place.
Warning:
During the installation, ensure that the electrical and pneumatic connections do not become
contaminated or damaged, in order to guarantee a secure contact.
RECARO Automotive Seating
1 Adapter bridge
2 Seat adapter
3 Adapter bridge screws
4 Cable tie
5 Cable harness
6 Electrical connector
7 Air connection
Page 15