C
1
5.
Remove the air ducts (if present).
Push the safety latches (2) in the direction of the arrow to do so and remove the air duct.
6.
Activate the express down mechanism.
7.
Vent the vehicle's air system.
Warning (risk of entrapment):
There is a risk of your fingers being crushed or trapped when lowering the seat.
D
1
8.
Loosen and remove the two screws (1) on the rail fastening.
9.
Move the seat into the forward position.
10. Loosen and remove the four front screws (2) on the rail fastening.
RECARO Automotive Seating
2
R0226
2
K0240
1 Air duct
2 Safety latches
1 Front screws
2 Rear screws
Page 9