Bluetooth Operation; Activate Bluetooth - lauson IVX22 Manual De Instrucciones

To enter the phono mode:
1) First turn the mode knob to PHONO/AUX mode. Then, you can start to play
the phono.
2) Make sure thay you have removed the stylus cover from the stylus and have
released the tone arm lock that secures the tone arm to the tone arm rest.
3) Set the turntable speed selector to the appropriate speed 33, 45 or 78 rpm. If
you are playing 45 rpm "singles", place the 45 rpm adapter centre spindle.
4) Place your record on the centre spindle
5) Raise the cue lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the cue lever to
gently lower the tone arm onto the record.
6) Auto stop ON/OFF button: When the button is pressed, the turntable is in
auto stop mode. The record will stop automatically when the tone arm
reaches the end.
When the button is released, the turntable is in manual mode and it will not
stop at the end.
7) To turn the system "OFF", press the POWER button again and the POWER
indicator goes "OFF".

BLUETOOTH OPERATION

1) First turn the mode knob to BT mode.
BLUETOOTH
2) Activate
3) You device will find "IVX22" or "IVX72" in the available pairing list.
Press FUNCTION
cable(not included) into the "AUX IN" socket and connect it to your
device. Then, play music by your device.
on device.
button to select AUX MODE. Insert the audio
EN-8