Tuning In A Preset Station - JVC UX-P30 Manual De Instrucciones

To preset stations manually—Manual Presetting
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
On the remote control ONLY:
1
Tune in the station you want to preset.
• See "Tuning in a Station" on page 11.
2
Press SET.
3
Press MULTI KEY > or
MULTI KEY < to select a
preset number.
4
Press SET again.
The tuned station in step 1 is stored in the preset number
selected in step 3 .
• Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.

Tuning in a Preset Station

On the remote control ONLY:
1
Press FM/AM.
The unit automatically turns on and tunes
in the previously tuned station—either
FM or AM.
• Each time you press the button, the band
SET
alternates between FM and AM.
2
Press MULTI KEY > or
MULTI KEY < to select
a preset number.
MULTI KEY
SET
FM/AM
MULTI KEY
12