Chicco MEC-6126 V Manual De Instrucciones página 12

• Press the "ON/OFF" button (e)
The display indicates the countdown from 15 min. to the end of the cycle.
The led above the ON/OFF button will blink for about 11.5 seconds As soon as the warm-up cycle begins (required time: 3.5
min.), the led turns red and will remain fixed until the end of the cycle.
At the end of the cycle, the display will indicate 00, the "ON/OFF" button led will turn to green and the appliance will beep
5 times.
NOTE: If the time needed to complete the warm-up cycle is longer than the options available for the "Timer" function,
the numbers will flash on the display to warn you that the entered time is not within the timer threshold. Press the ON/
OFF button to start the selected cycle.
CLEANING, CARE & MAINTENANCE OF THE APPLIANCE
When you finish using the appliance, always unplug the bottle warmer's power cable plug from the mains socket. Allow
the bottle warmer to cool down completely, remove any water left inside and dry the inside thoroughly; store it in a
clean and dry place.
DESCALING:
During normal use of the appliance, scale residue may build up inside the water tank which can compromise the perform-
ance and damage the appliance over time. To remove the scale from the bottom of the tank, check that the bottle warmer
is cold, make a solution of water and white vinegar, in equal parts, and pour into the tank; leave to soak overnight.
Never switch the bottle warmer ON when the tank is being soaked in the water-white vinegar mix.
On completing the cycle, rinse the inside of the tank thoroughly; then wash and dry the inside and outside of the appliance.
Fill the bottle warmer tank with 140 ml of water and complete an idle warm-up cycle using the 250 ml feeding bottle fridge
starting temperature settings. When the green led above the "ON/OFF" (e) button comes on, switch the appliance OFF,
leave to cool down and then remove any water left inside and dry thoroughly.
Use a soft damp cloth to clean the external parts of the appliance.
In order to avoid the formation of scale residues, it is necessary to frequently clean the water tank, at least once a week, or
more often if the water used has a high limestone content.
Do not use tools, abrasive products, harsh detergents, alcohol, solvents or similar products when cleaning the appliance,
which may cause permanent damage to the bottle warmer and/or its accessories.
WARNING
- Never place the bottle warmer directly under a running water tap, and never submerge the appliance, the plug
or the power cable in water or any other liquid.
- Never place the bottle warmer in the dish-washer.
TECHNICAL FEATURES
REF 00060082000000
Mod. MEC-6126 V
220-240V ~ 50/60Hz 180W
Weight: 530 g.
Measurements: 135.5 x 149.5 x h157mm
Declaration of EC Compliance:
Artsana S.p.A declares that this Chicco Home Bottle Warmer, model MEC-6126V, complies with the essential requirements
and other provisions required by the 2004/108/EC Directive (electromagnetic compatibility) and 2006/95/EC Directive
(electrical safety). Please feel free to contact Artsana S.p.A. Via S. Catelli 1 – 22070 Grandate (Co) Italy for a copy of this
EC Declaration.
12