Maintenance Advice; Maintenance Intervals Schedule; Cleaning The Ploughshare - Checchi & Magli TRIUM Serie Manual De Uso Y Mantenimiento

Maintenance advice

Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary

Maintenance intervals schedule

To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the
Maintenance schedule
Frequency Component
Dispenser
Every
Ploughshare
Lift frame
Every day Safety devices
Warning and hazard plates
Machine components
Every 50 hours
Nuts and bolts
Every 150 hours Tyres

Cleaning the ploughshare

Clean the ploughshare to remove any debris, mud, peat,
plant residues etc that may have built up during use.
UN41-0154NI
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Loosen the wing nut (A).
3) Turn the lock lever (B).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
5) Clean the ploughshare with the tool provided (C).
English language
MAINTENANCE INFORMATION
maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
manufacturer is carried out.
Type of work
Cleaning
Cleaning
Inspection
Inspection
Inspection
Greasing
Tightening
Pressure check
Lack of cleaning will limit the ejector range, there-
fore, as well as affecting the machine's operation, it
also causes serious mechanical damage.
6) Once the cleaning is complete, replace the plough-
share in the working position.
7) Check that the (Plant Control) plate is inside the
ploughshare.
8) Make sure that the ploughshare is secured in place
with the lock lever (B).
9) Tighten the wing nut (A).
29
Manual reference
Cleaning the ploughshare
Guards
Information and safety signs
Lubrication diagram
Tyres check
Use and maintenance
7