Maintenance Information; Safety Advice For Maintenance; Maintenance Interval Schedule; Cleaning The Ploughshare - Checchi & Magli DUAL 12 COMPACT Serie Manual De Uso Y Mantenimiento

Safety advice for maintenance

Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary

Maintenance interval schedule

To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-
turer is carried out.
Interval Component
Dispenser
Every work hour
Ploughshare
Lift frame
Every work day Safety devices
Warning and hazard plates
Machine components
Every 50 hours of work
Nuts and bolts
Every 150 hours of work Tyres

Cleaning the ploughshare

Clean the ploughshare to remove any debris, mud, peat,
plant residues etc that may have built up during use.
Lack of cleaning will limit the ejector range, therefore, as
well as affecting the machine's operation, it also causes
serious mechanical damage.
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Loosen the wing nut (A).
3) Turn the lock lever (B).
4) Push the share forwards and turn it so it is facing
downwards.
5) Clean the ploughshare with the tool provided (C).
6) Once the cleaning is complete, replace the plough-
share in the working position.
7) Check that the Plant Control device (D) is inside the
share.
8) Make sure that the share is secured in place with the
lock lever (B).
9) Tighten the wing nut (A).
English language

MAINTENANCE INFORMATION

maintenance envisaged in the instruction manual.
Special maintenance operations (non included in
this handbook) require a specialised workshop on
the premises which meets the requirements speci-
fied by the relative laws in force (appropriate equip-
ment suitably trained staff etc.); if you do not have a
compliant workshop, contact an authorised one.
Maintenance intervals
Type of work
Cleaning
Cleaning
Inspection
Inspection
Inspection
Greasing
Tightening
Pressure check
D
UN41-0507MM
34
Manual reference
Cleaning the ploughshare
Guards
Information and safety signs
Lubrication diagram
Tyre check
C
Use and maintenance
7
B
A