Brita RF-104 Instrucciones De Instalación página 7

Filter Replacement
(every 6 months)
• Replace filters every six months or when
capacity is reached.
• Changing water filter on a regular basis
ensures optimum performance of the water
filter.
Note: If you have an existing in-line refrigerator filter with
quick-connect fittings, simply push down on the outer
ring of the quick connect fitting and pull the tubing out
of the filter.
System
RF-104 Inline Refrigerator/Icemaker Filter
Replace filters every six months or when capacity
is reached.
RF-104 installation instructions
Need Help? 1-866-709-2086
Be sure to turn off the cold water supply until leak issue is resolved.
Use and Care
Brita Filter RF-104
®
Please see the Performance Data Sheet for the certified
performance of specific filters.
The Brita® Inline Icemaker filter used with this filter
system has a limited service life. Changes in taste,
odor, and/or flow of the water being filtered indicate
that the filter should be replaced.
Flow Rate: 0.5 gpm (1.9 lpm)
Operating pressure 30-100 psi (207-690 kPa)
7
Version 1.0C