Descargar Imprimir esta página

BABYTREND Orby WK38 A Serie Manual De Instrucciones página 4

Publicidad

ASSEMBLY ASAMBLEA
TO ASSEMBLE WALKER
PARA ENSAMBLAR EL ANDADOR
1)
• To open the baby walker raise the
tray up until the walker clicks into
position (Fig. 1).
• Para abrir el andador, levante la
bandeja hasta que el andador encaje
en su posición (Fig. 1).
2)
• The baby walker can be used for 3
different heights. From underneath
the front of the walker, turn the safety
button right and slide vertically to
adjust the height (Fig. 2).
• El andador puede utilizarse en 3
alturas diferentes. Desde debajo de
la parte delantera del andador, gire
el botón de seguridada la derecha y
deslice verticalmente para ajustar la
altura (Fig. 2).
3)
• Check that the safety button is turned
horizontally to prevent the accidental
release of the mechanism (Fig. 3).
• Verifique que el botón de seguridad
esté se volvió horizontalmente para
evitar que el mecanismo se suelte
accidentalmente (Fig. 3).
5
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
4)
• Insert the plastic pins on the front of the
seat into the holes, then click the pins
into position by pushing them downwards
firmly (Fig. 4).
• Inserte las chavetas de plástico ubicadas
en el frente del asiento en los orificios y a
continuación, haga clic en los pasadores
en su posición empujándolos hacia abajo
firmemente (Fig. 4).
5)
• Locate the straps with plastic buckles on
Fig. 1
back of seat and corresponding slots on
tray. Insert each strap into corresponding
slot (Fig 5).
• Ubique las tiras con las hebillas de
plástico en la parte trasera del asiento
y las ranuras correspondientes en la
bandeja. Inserte cada tira en la ranura
correspondiente (Fig. 5).
Fig. 2
6)
• From the underside of tray pull each
strap completely through each slot and
pivot plastic buckle to lay flat against
underside of tray (Fig. 6).
• Desde la parte inferior de la bandeja jale
de cada tira completamente a través
de cada ranura y pivotee la hebilla de
plástico para que quede plana contra la
parte inferior de la bandeja (Fig. 6).
Fig. 3
ASSEMBLY ASAMBLEA
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 4
Fig. 5
Fig. 6
6

Publicidad

loading

Este manual también es adecuado para:

Orby wk38 s serieOrby wk38d34a