Pre-Installation; Before You Begin; Product Description/Intended Use; Specifications - Everbilt PUP60-HD Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pre-installation

BEFORE YOU BEGIN

Handle carefully. Check the packing list to account for all items. Visually inspect for shipping damage. If damaged, immediately file a claim
with the carrier.

PRODUCT DESCRIPTION/INTENDED USE

WARNING: Potential risk of fire or explosion. Never pump gasoline, chemicals, or any corrosive or flammable liquids with the pump. Also do
not operate the pump in an atmosphere that could contain flammable vapors or fumes. Pump water only.
WARNING: Never pump water containing sand, silt, abrasives, solids, or foreign material which can clog the pump and damage the shaft
seal.
NOTE: Use in applications involving salt water or brine will void the warranty. This unit is not designed for that application.
NOTE: When using the pump, always have a suction strainer or a foot valve (not included) installed. If a strainer or a foot valve are not used,
the pump could fail and void the warranty. Clean the strainer and flush out the pump with a garden hose after each use.
This portable utility/sprinkler pump is intended for numerous applications, including sprinkler systems, pumping water from ponds, lakes,
and streams, and increasing city water pressure. The unit operates efficiently on a 115V, 60 Hz, single phase, permanent split capacitor
motor that includes a 6 ft. long, 18 gauge, 3-prong power cord. The motor is maintenance-free. Neither the motor nor bearings require
further lubrication. Additionally, the motor is protected from overheating and damage. It automatically shuts off with sudden rises in
temperature and restarts after cooling down.
The unit has a corrosion-resistant pump with a 1/2 HP ODP motor capable of suction lifts up to 25 ft. and flow rate up to 10.3 GPM at 90ºF
maximum water temperature.

SPECIFICATIONS

Power Supply
Full Load Amps
Motor Type
Motor Duty
RPM
Inlet and Discharge Connections
Discharge Adaptors (2)
Housing and Impeller Material
Temperature Range of Pumped Liquids
Dimensions

PERFORMANCE DATA

SKU
HP
Volt
1001
092
232
1/2
115 V
GPH of Water @ Total Feet of Lift
Amps
0 ft.
20 ft.
6.5A
618
600
115V, 60 Hz
6.5
1/2 HP, ODP, PSC
Continuous
3450
1 in. MNPT
1 in. FNPT x 3/4 in. Male Garden Hose
Thermoplastic
32°F to 90°F
10-1/5 in. x 7-1/5 in. x 16-1/5 in.
40 ft.
60 ft.
580
468
4
Max. Lift
80 ft.
100 ft.
300
180
134FT

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1001 092 232

Tabla de contenido