Klarstein Metrobreeze Miami Manual De Instrucciones página 30

EN
30
TEMP- button
The temperature can be adjusted in the cooling and heating function within the
temperature range of 16 ~ 31 °C can be set. Each time the button is pressed, the
temperature is increased by 1 °C.
TEMP+ button
The temperature can be adjusted in the cooling and heating function within the
temperature range of 16 ~ 31 °C can be set. Each time the button is pressed, the
temperature is increased by 1 °C.
MODE button
Press this button repeatedly to select the mode. The available modes are: Cooling,
dehumidification, air supply, heating (optional) and automatic.
Cooling mode
• Press this MODE button until the corresponding indicator light (ice crystal) lights up.
During the cooling function, connect the exhaust hose to the unit so that the hot air
can escape from the room.
• You can set a temperature between 16°C ~ 31°C.
• Press the SPEED button to set the speed: low, medium, high).
Note: To improve the cooling capacity of the unit, make sure that no direct sunlight
enters the room you wish to cool and that the unit is not placed near heat sources.
Automatic function
Press the mode button until the corresponding LED lights up and select the automatic
function.
Note: The automatic function is an optional function adapted to the user's needs.