Installation - Klarstein Metrobreeze Miami Manual De Instrucciones

EN
26

INSTALLATION

Installing the exhaust hose
1. Insert the ends of the exhaust hose into the square fixation on one side and the flat
fixation on the other side.
2. Fasten the square fixation in the opening at the back of the unit (see illustration
above).
3. Attach the other end of the exhaust hose to a nearby windowsill.
Installation of the device
• Place the unit on a flat surface with a minimum clearance of 30 cm to all sides of the
unit. Do not block the ventilation openings.
• Do not use the device primarily as a dehumidifier.
• The wiring must comply with local electrical safety regulations.