Operation; Before Initial Use - Waeco CF-80 Instrucciones De Uso

_CF-80_110.book Seite 29 Montag, 8. Januar 2007 2:43 14
6

Operation

6.1

Before initial use

Note
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the chapter "Cleaning and maintenance" on page 35).
The handles are enclosed unassembled. If you wish to attach the
handles, proceed as follows:
➤ Make a handle by putting two holders (Fig. 4 1, page 4) and a
handle (Fig. 4 2, page 4) together.
➤ Fasten the grip with the enclosed screws in the holes provided.
Selecting the temperature units
You can switch the temperature display between Celsius and Fahr-
enheit. This is how to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (Fig. 2 4, page 3) twice.
➤ Use the "UP +" (Fig. 2 6, page 3) and "DOWN -" (Fig. 2 7,
page 3) buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a
few seconds. The display flashes several times before it returns
to the current temperature.
Turning the lid stop around
You can turn the lid stop around if you want to open the lid from the
other side.
To do this, proceed as follows:
➤ Undo the screws on the lock lugs (Fig. 5 1, page 4) and take
them off.
➤ Undo the screws on the hinges (Fig. 5 2, page 4) and take
them off.
➤ Lay the lid down.
➤ Fit the hinges on the side you want.
➤ Fit the lock lugs on the side you want.
All manuals and user guides at all-guides.com
Operation
29