Hardware Connections - Zyxel AG-220 Guia De Inicio Rapido

5 You must restart your computer before using the ZyXEL
utility. Save your work and close any open programs
before restarting. Click Finish to complete the installation.

Hardware Connections

1 Locate an available USB port on the computer.
2 Remove the protective cap
to expose the USB
connector. Insert the AG-
220 into an available USB
port on the computer. The
AG-220's LINK light turns
on if it is properly inserted.
Never bend, twist or force the AG-220 into the port.
If there is not enough space to attach the AG-220,
use the included USB cable.
ENGLISH
6