Symbols Used - NOVAFON power Manual De Usuario

6. TECHNICAL SPECIFICATIONS

6.1. SYMBOLS USED

Alternating current
Device of protection class II according to DIN EN 61140
IP44 (splash-proof)
Hertz
Short-time duty
Milliampere
Volt
Disposal according to the EU Directive on Waste Electrical and Electronic
Equipment (WEEE)
Displays the manufacturer of the medical device according to the EU Direc-
tives 93/42/EEC.
Displays the serial number of the manufacturer so that a specific medical
SN
device is identified
Type BF: A type BF (Body Floating, conductive contact with the body) applied
part/device is connected to the patient's body to transmit electrical energy or
an electrophysiological signal to or from the body
Temperature limit: refers to the temperature limits to which the medical
device can be safely exposed.
Humidity limitation
%
Atmospheric pressure limitation
Refer to instruction manual/booklet
General warning sign
6.2. TECHNICAL SPECIFICATIONS
· Operating conditions: 5 °C to 30 °C; 15% to 93% relative humidity, not con-
densing; 700 hPa to 1060 hPa atmospheric pressure
· Storage/transport: -25 °C to 70 °C; up to 93% relative humidity, not condens-
ing; 700 hPa to 1060 hPa atmospheric pressure
· Nominal voltage: Primary 230V~, 50 Hz, 65mA; Secondary 17V~, 50Hz, 450mA
· Nominal frequency: 50 Hz
· Operating mode: KB 20/15 min
· Nominal consumption: 9.5 W
· The devices are conform with EN 60601-1-2:2015 or CISPR 11 Emission
Class A and Group 1 respectively. The devices have been tested using the
interference immunity test level for home use
· Product category: Medical device class IIa according to the Medical Devices
Directive (93/42/EEC), conformity with 2011/65/EU is still declared.
· Manufacturer: NOVAFON GmbH, Daimlerstraße 13, 71384 Weinstadt
· Operating noise: maximum 70 dBA