Reverse Osmosis Water Supply; Parts And Features - Samsung RF4289HA Manual Del Usuario

Reverse Osmosis Water Supply

IMPORTANT : The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water fi ltration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system
is less than 40 to 60 psi (276 to 414 kPa):

PARTS AND FEATURES

Use this page to become more familiar with the parts and features of the refrigerator.
FF Ice-Maker FF Ice-Maker
Dis Door Bins Dis Door Bins
Slide-Shelf Slide-Shelf
Cap Chute Cap Chute
Vertical Hinged Vertical Hinged
Section Section
Mid Door Bins Mid Door Bins
Vegetable & Fruit Vegetable & Fruit
Drawers Drawers
Water Filter Water Filter
Left Door Bins Left Door Bins
Tilting Pocket Tilting Pocket
78_ operating
DA68-02520A(1.0).indb 78 DA68-02520A(1.0).indb 78
Interlocking switch Interlocking switch Light Light
Light Light
• Check to see whether the sediment fi lter in the
reverse osmosis system is blocked.
Replace the fi lter if necessary.
• Allow the storage tank on the reverse osmosis
system to refi ll after heavy usage.
• If your refrigerator has a water fi lter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water fi lter.
If you have questions about your water pressure,
call a licensed, qualifi ed plumber.
Door Closer Door Closer
Cover Eva (Light) Cover Eva (Light)
Right Door Bins Right Door Bins
Tempered glass Tempered glass
shelves shelves
Light Light
Quick-Space Quick-Space
Glass Shelf Glass Shelf
Cover Veg Cover Veg
Light Light
Light Light
Convertible Room Convertible Room
Auto Pull Out Auto Pull Out
Drawer Drawer
Freezer Drawer Freezer Drawer
Bin Bin
2012.5.30 10:42:11 AM 2012.5.30 10:42:11 AM