The built-in vent system helps remove cooking vapors, odors and
smoke from foods prepared on the grill.
The vent fan comes on automatically when either grill is turned on and
turns off automatically when both grills are turned off.
To operate the vent fan manually, turn the control knob to the FAN setting.
Before cleaning any part of your grill, be sure all controls are off.
Do not operate the grill without all parts in place.
Control Knobs and Control Area
The knobs on the control panel can be removed
with the controls in the OFF position. Pull each knob
straight up. Wash the knobs in warm soapy water
or a dishwasher; do not use abrasive cleansers or
materials. To replace each knob, match the flat part
of the knob opening with the spring on the shaft,
returning to the OFF position.
Grease Jar
A grease jar is located below each grill basin under
the countertop. Check periodically to prevent spillovers.
Unscrew and remove. If the jar is broken, replace
with any heat tempered jar, such as a canning jar,
which has a standard screw neck.
10
VENTILATION SYSTEM
CARE AND CLEANING
To clean the area under the control knobs, use
mild cleansers, such as soapy water or mild liquid
sprays such as 409. Wipe with a sponge, damp cloth
or paper towel. Do not scrub with S.O.S. pads or
abrasive cleansers.
NOTE: Make sure the grease jar is in place
before grilling.