Energy Saving Cooling Mode; Display Screen Brightness; Operating The Air Conditioner Without The Remote Control - Friedrich M24YJ Manual De Operaciones

ADVANCED FUNCTIONS
16

Energy saving cooling mode

This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable
environment.
|
1
Press to turn the power on.
f
2
Press repeatedly to select the cooling
operation.
P
3
Press .
G
- is displayed on the display screen.
NOTE
!
This function may not be supported,
depending on the model.
NOTE
!
• Possible, Different temperature is
displayed on between remote controller
and air conditioner during operation.

Display screen brightness

You can adjust the brightness of the indoor
unit display screen.
G
1
Press
to turn on/off the display screen.
NOTE
!
This function may not be supported,
depending on the model.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according a
type of model.
2
Press the On/Off button.
* The feature can be changed according a
type of model.
- For cooling and heating models, the
operation mode changes, depending on
the room temperature.
Room temp. Set temp.
Below 69.8°F
75.2°F (24°C)
(21°C)
Above 69.8°F
(21°C) and
73.4°F (23°C)
below 75.2°F
(24°C)
Above 75.2°F
71.6°F (22°C)
(24°C)
- For cooling-only models, the temperature
is set to 71.6°F (22°C).
ON/OFF
button
Operation
mode
Heating
operation
Dehumidifying
operation
Cooling
operation