Restarting The Air Conditioner Automatically - Friedrich M24YJ Manual De Operaciones

Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory
default setting.
Disabling auto restart
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according a
type of model.
2
Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink twice 4 times.
* The feature can be changed according a
type of model.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp will
blink 4 times.
NOTE
!
If you press and hold the On/Off button for
3 – 5 seconds instead of 6 seconds, the
unit will switch to the test operation. In the
test operation, the unit blows out strong
air for cooling for 18 minutes and then
returns to the factory default settings.
ON/OFF
button
ADVANCED FUNCTIONS
17