Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LOCATION
Remove exterior and interior packings, wipe the
outside thoroughly with a soft dry cloth and the inside
with a wet, lukewarm cloth. Avoid placing the unit in a
narrow recess or near any heat source, direct sunlight,
or moisture. Let air circulate freely around the unit.
Keep the rear of the refrigerator 5 inches away from the
wall.
LOCATION
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the
refrigerator and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight
may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
To avoid vibration, the unit must be set level. This is
accomplished by adjusting the (2) front leveling legs,
located under the refrigerator.
FEATURES
1. Worktop and Chrome Rail
2. Electric Controls/Display
INSTALLATION INSTRUCTIONS
NOTES:
• This appliance is intended for FREE-STANDING
INSTALLATION ONLY, and is NOT intended to be
built-in.
• Before connecting this appliance to electrical power
supply, leave it to stand for approx. 24hours, which will
reduce the possibility of malfunction in the cooling
system due to transport handling.
• This appliance is approved for INDOOR USE
ONLY and is NOT intended for outdoor
operation.
IMPORTANT: Install this appliance in an area where the
ambient temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance is too
low or high, cooling ability will be affected.
3. Stainless Steel Door/Black Door
4. Leveling Legs or optional Swivel
Castors (included)
2
Publicidad
Tabla de contenido
