Operating Instructions; Electronic Controls - Danby Diplomat DAR163BLDP Manual De Instructions Pare El Uso Y Cuidado De Su Unidad

CASTOR INSTALLATION
The locking swivel castors should be installed in the front of the unit for easy access.
1. Lay the unit on it's back.
2. Remove the four(4) adjustable feet.
3. Casor Installation as shown in
Fig A
Fig. A
ADJUSTABLE
INSTALLATION
Place the appliance firmly on a solid base. Some appli-
ances have adjustable feet on the front side; use them to
level the appliances.

ELECTRONIC CONTROLS

TEMPERATURE INCREASE
TEMPERATURE DECREASE
LED DISPLAY
FAHRENHEIT MODE
F
CELSIUS MODE
C
FAHRENHEIT/CELSIUS
SELECTOR
F/ C
The electronic LED display on this refrigerator ispro-
grammed to display (independently) the following
temperature (only) information:
INSTALLATION INSTRUCTIONS

OPERATING INSTRUCTIONS

F
C
F/ C
INTERNAL CABINET TEMPERATURE: This setting is
represented by a steady (non-flashing) LED display
and is the normal (LED) default setting during
operation.
SET OPERATING TEMPERATURE: This setting is
The electronic LED display on this refrigerator is
programmed to display (independently) the following
temperature (only) information:represented by a flashing
LED display and can only be programmed (SET) by
pressing and releasing either of the temperature keys
during operation.
Note: The set temperature can only be adjusted/set
while the LED is in "flashing" mode.
DEFAULT SETTINGS: When the unit is first connected
to the power supply (and/or in the event of a power
failure) temperature settings automatically revert to
the following default settings:
4