Before Use; Charging The Led Work Lamp - LIVARNO LUX HG01386A Instrucciones De Utilización Y De Seguridad

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
T his product is not a toy and should be kept out of the reach of children. Children are not aware of
the dangers associated with handling electrical products.
D o not use the article if you detect any kind of damage.
CAUTION! DANGER OF EXPLOSION! Do not operate the LED work lamp in poten-
tially explosive environments in which there are inflam mable vapours, gases or dusts.
P rotect the appliance from moisture and damp. Never immerse the device in water or other liquids!
C onnect the LED work lamp to a properly installed mains socket only. The voltages must comply with
information given in the section "Technical data".
E nsure that the electrical socket is easily accessible so that you can pull the plug quickly out of the
socket if necessary.
D o not carry out any modifications or repairs to the product yourself. The LEDs cannot and must not
be replaced.
CAUTION! The protective surround to the LEDs cannot be replaced. Dispose of the LED work lamp
if you discover cracks or signs of fracture on the protective surround.
D ispose of the product if the LED work lamp, mains adapter or charging station is damaged.
N ever connect the LED work lamp to a power supply socket if the LED work lamp, power lead or
socket is damaged or the LED work lamp has been dropped.
E nsure that the power lead cannot become damaged by sharp edges or hot objects. Unwind all the
lead completely before use.
K eep easily flammable materials away the product. Never hang objects above the LED work lamp
or the mains adapter and never cover them.
P ull the mains adapter / plug out of the mains socket when you are not using the LED work lamp or
before you clean it. Do this as well if signs of a fault develop during use or charging, e.g. smoke,
burning smell etc., or during a storm. When doing this, pull directly on the mains adapter / plug and
not on the lead.
P rotect the product from extreme heat and cold.
T he product is only suited for use with the included mains adapter (model no. SD-G0501000D).
P lease note that the power adapter continues to draw a small amount of power even if the lamp is
turned off as long as the power adapter is plugged into a power outlet. To switch the device off
completely, unplug the power adapter from the socket.
T he illuminant is not replaceable. If the illuminant fails at the end of its life, the entire light must be
replaced.

Before use

Q

Charging the LED work lamp

Q
Note: You can charge the LED work lamp from an ordinary domestic mains power outlet.
Note: To use the LED work lamp without an adapter, you must first charge the integral rechargeable
batteries. It takes approx. 6 - 8 hours.
Note: Fully charge the LED work lamp before first use.
Note: Charge the LED work lamp at least once a month, if it is to remain unused for an extended period
of time.
GB/MT 29