Fixing The Device; Mounting The Charging Station; Maintenance And Cleaning; Disposal - LIVARNO LUX HG01386A Instrucciones De Utilización Y De Seguridad

Fixing the device

Q
The LED work light can be used in 2 ways without having to hold it in your hand:
H old the magnet
6
F old out the hook
be turned through 360 degree.
M ounting the charging station (See Fig. C)
Note: You will need an electric drill.
CAUTION! RISK OF INJURY! Please read the operating instructions for your drill.
CAUTION! Ensure that you do not damage any electricity cables in the wall or ceiling.
Mark the two mounting holes at a distance of approx. 35 mm apart.
N ow drill the holes on the wall (Ø approx. 6 mm; depth approx. 30 mm).
I nsert the dowels
13
S crew up the screws
N ow hang the charging station to the screws via the mounting holes

Maintenance and cleaning

Q
The product requires no maintenance. The LEDs cannot be replaced.
S witch off and disconnect the product from the power supply before you clean it.
N ever immerse the product in water or other liquids.
D o not use corrosive cleaning agents.
C lean the product regularly with a dry, fluff-free cloth. Use a slightly moist cloth to remove any stub-
born dirt.

Disposal

Q
The packaging is made entirely of recyclable materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached
the end of its useful life and not in the household waste. Information on collection points and
their opening hours can be obtained from your local authority.
Defective or exhausted rechargeable batteries must be recycled in accordance with Directive 2006 / 66 / EC
and its amendments. Return the battery and / or the device through the appropriate collection facilities.
against a metallic magnetic surface. The LED work light remains in this position.
to suspend the LED work light from a suitable suspension point. The hook can
5
into the drilled holes. If necessary use a hammer to make this easier.
on the dowels.
12
.
11
GB/MT 31