SET SUPPORT BAR SPREAD
Ensure that distance between left
and right support bars are the same
MEASURING TIP:
at the front and rear of vehicle.
17" (43cm) Min.
32" (81cm) Max.
INSTALL ROLLER
With red levers in closed
position, slide roller onto
support bars.
Instruction #1034172C-14/57
17" (43cm) Min.
32" (81cm) Max.
17" (43cm) IS THE MINIMUM SPREAD.
32" (81cm) IS THE MAXIMUM SPREAD.
Note: roller to be angled downward for canoes.
Use the provided wrench to tighten
the bolt on each side of roller.
Be sure that support bar is fully
inserted into t-lug before tightening.