CLOSE AND TIGHTEN REAR CLAMP (DO NOT FULLY TIGHTEN)
Close rear clamp around crossbar.
CLOSE AND TIGHTEN FRONT CLAMP (DO NOT FULLY TIGHTEN)
Slide support
bar back, past
adjustment knob.
Close front clamp around crossbar.
Instruction #1034172C-5/57
90°
Pass the t-bolt through
bail, and turn the t-bolt
90° to rest in slot.
90°
Pass the t-bolt through
bail, and turn the t-bolt
90° to rest in slot.
Tighten the adjustment knob just
enough to hold clamp in place.
Open red lever before
proceeding to next step.
Tighten the adjustment knob.
Align markings on clamp and
adjustment knob.
Align
Then slide support bar
forward through clamp.