Yakima ShowBoat 66 Manual Del Usuario página 15

ALIGN SUPPORT BARS
Open both red levers. Slide
roller and support bars back
and forth to check for smooth
operation. This action will
help to align support bars.
SET MAXIMUM EXTENSION
Set distance from center
MEASURING TIP:
of roller to center of rear
crossbar at 24" (61cm).
Close the red levers.
Instruction #1034172C-15/57
Once aligned, tighten the front clamps completely, using firm pressure. Be sure to align front
knobs' markings with markings on clamps (refer to step 10). No interference between knobs and
support should bars occur. Then tighten rear clamps with firm pressure.
24" (61CM)
24" (61CM)