GE GXSV65R Manual Del Propietario E Instalación página 9

INSTALL THE FAUCET (CONT.)
6. Feed the water tube through the faucet base.
Then push the tube into the fitting on the bottom
Pull tube slightly to make sure it is secure.
Faucet Body
Base
Butterfly Bracket
7. Push the faucet body down into the faucet base
and twist clockwise until it clicks into place.
NOTE: You can install the faucet so the handle is
on the right or the left side.
If you want the faucet handle on the right, position
the handle at the back of the faucet base before
turning clockwise.
If you want the faucet handle on the left, position
the handle at the front of the faucet base before
turning clockwise.
Faucet
7.
set screw and begin to tighten by hand. Finish
tightening with the allen wrench provided in the
packet.
49-50323
Installation Instructions
Gasket
Sink
Faucet
9