Led Indicator - ausdom AH862 Manual Del Usuario

Bluetooth Headset

9. LED Indicator

The LED Indicator specifies the status of your headset. The table
below shows you the various LED indications available.
Color
Blue
Red
Blue & Red
* In the paring mode, when idling more than three minutes, the LED indicator
will turn to continuous flashing blue from flashing red and blue alternately.
About 10 minutes after flashing, the headset will shut down automatically. In
the period before the headset shut down, you can still pair and connect the
Bluetooth device.
10. Take Care of Your Headset
1. Avoid exposing the headset to rain or other liquids.
2. Avoid getting moisture or liquids into any button and other
equipments.
3. Always store the headset upon power off and safely protected.
4. Only use a dry cloth to wipe and clean the headset.
5. You can use a damp cloth to wipe the ear leatherette cushions
carefully.
6. Store the headset at a suitable temperatures between
-25 C~60 C. High temperature may damage the battery life and
o o
reduce the battery performance.
11. Troubleshooting
Q: I can not hear anything in my headset when using the
mobile phone.
Status
Solid
Flashes
Flashes
Flashes 2 Times Every 1-2 Sec.
Solid
Flashes
Flashes 2 Times
Flashes 2 Times Every 1-2 Sec.
Alternate Flashes
- 6-
English
Description
Pairing complete
Standby
Power on
On line call
Charging
Low battery
Power Off
Incoming call
Pairing