Disassembly & Cleaning - OXO GOOD GRIPS Manual Del Usuario

DISASSEMBLY & CLEANING
TO REMOVE & CLEAN THE SLICING BLADE
TO REMOVE & CLEAN THE JULIENNE & THICKNESS CYLINDER
TO CLEAN THE MANDOLINE BODY
1- Hold the Slicing Blade by its soft handle.
2- Slide the Blade out of the Mandoline body.
3- Hand wash and promptly dry.
1- Remove the Slicing Blade as shown above.
2- Use one hand to press on the OXO logo on
the Top Runway to flip up the Runway.
3- Use the other hand to lift the Julienne &
Thickness Cylinder by its soft knob to remove
it from the Mandoline.
4- Hand wash and promptly dry.
1- Remove the Slicing Blade and Julienne &
Thickness Cylinder as shown above.
2- Flip up the Top Runway by pressing on
the OXO logo as shown above.
3- Flip up the Bottom Runway by pushing up
on the Runway from beneath the Mandoline.
4- Place the Mandoline body in the dishwasher,
or hand wash and dry.