Yakima Q Stretch Kit Manual Del Usuario página 2

Disassemble the two rear towers.
• Open the cam cover.
• Completely unscrew the adjustment post.
Disassemble the two rear towers.
1033431D-2/30
cam
cover
adjustment post
2X 2X
cam cover
Assemble rear clips.
• Insert fastener and push it
• Do not install locks yet.
• Set assembly aside.
A
• Open the cam cover.
• Completely unscrew the adjustment post.
• Carefully lift out and set aside.
adjustment post
• Insert lock housing through
clip, matching the notches.
• Insert the correct clip into
the rear clip holders.
down over lock housing.
Continue to step 5.
2X