Yakima Q Stretch Kit Manual Del Usuario página 5

Set the rear towers/bar on the vehicle.
THE FRONT TOWERS AND BAR
SHOULD ALREADY BE INSTALLED.
• Clean the vehicle roof with a soft cloth.
• Open car doors.
• Set rear rack on the roof.
Position rear rack.
• Use M4 measurement (from FitList, clip sheet,
or at Yakima.com/measurements).
• Measure from center of bar to center of bar
Center rear rack on vehicle.
Center rear rack side to side by measuring from the door frame to tower base.
Measuring points and distances on both sides must be equal.
1033431D-5/30
4
M
2X
Attach rear covers.
2X