Orient the Stretch Kit.
TUBE HOOK
• The Stretch Kit has a LEFT and a RIGHT tube.
• The tubes slide to adjust.
• The housing holds the rear clip assembly.
Attach Stretch Kit to towers.
Slide each hook into the rectangular
opening on the back of the towers.
Set distance of housings.
SLIDE BOTH HOUSINGS TO THE REaR OF THE
CaR UNTIL THEY STOP (unless a measurement
is noted* in your Q-Clip instructions).
1033431D-6/30
TUBES
(stop buttons)
HOUSING
SLEEVE HOOK
Hook in and down.
* If a measurement is specified
on your Q-Clip Instruction set the
distance from the center of the
front towers to the center of the
housings to the specified distance.
SLEEVES
(front of car)
2X
2X