Yakima Q Stretch Kit Manual Del Usuario página 7

Loosely attach cam covers.
• Open both driver's side and passenger side front doors.
• Carefully thread adjustment post onto housing to get the cover loosely attached (2 turns max).
• Repeat for other side.
The screw should be above
the pivot with the tab in the
down position.
• Using the adjustment post, take
slack out of the system until the
cam cover closes easily while
holding the clip to the door frame.
DO NOT FULLY TIGHTEN.
• Repeat for other side.
1033431D-7/30
pivot
point
tab
• Carefully push the clip in
place up against the door
frame. DO NOT MOVE
THE TOWERS.
2X