Packing List; Optional Accessories; General; Introduction - AKG CU700 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Check that the package contains all the parts listed below. If anything is missing, please contact
your AKG dealer.
• 1 x CU 700 charger
• 1 x AC Adapter (if checked on the packaging)
• 4 x AA size NiMH rechargeable batteries
• For options and accessories, please refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The CU 700 has been designed specifically for use with the DMS 700 wireless system.
The charger provides two charging slots specially shaped to accept the DHT 700 and DPT 700 trans-
mitters. The charging slots operate completely independently so you can charge two transmitters with
rechargeable batteries simultaneously.You do not need to remove the batteries from the transmitter for
charging.
The CU 700 charger
• monitors battery voltages and temperatures during charging;
• generates a flag signaling the end of the charging cycle upon reaching maximum capacity;
• monitors all required safety parameters and will stop the charging cycle if one or more safety pa-
rameters are out of range.
The charger checks the batteries inside the transmitter and will automatically deactivate the charging
function if it detects a dry battery.
Charging slot 1
Charging slot 2
Status LED for charging slot 1
2
Status LED for charging slot 2

Packing List

Optional Accessories

3

General

Introduction

Top and Front Panels

CU
700
CU
700
5

Publicidad

Tabla de contenido
loading

Tabla de contenido