Temperature Indicator; Warranty Disclaimer; Declaration Of Conformity - Hama Cube Instrucciones De Uso

Stopping the alarm clock/snooze function
• If the alarm is triggered, an alarm signal will sound for 2 minutes. The frequency of
the alarm signal increases the longer the alarm continues.
• Press the ALARM button (8) to stop the alarm.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT button (12) to
activate the snooze function.
begins to ash on the display. The alarm signal will be stopped for 10 minutes,
after which it will sound again.

5.4. Temperature indicator

• Press the -/°C/°F button (11) to choose between °C and °F for the temperature
display.
6. Care and Maintenance
• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
• Make sure that water does not get into the product.

7. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.

8. Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the radio equipment type
[00176910, 00176911, 00176912, 00186304, 00186305] is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: www.hama.com -> 00176910, 00176911,
00176912, 00186304, 00186305 -> Downloads.
7