Connection To Power Supply; Connection To Co2; Technical Features - J.P. SELECTA Incubator CO2 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80234 REV C
6
J
.P. SELECTA s.a.u.
Noviembre 2017

5.2 Connection to Power Supply

Place the equipment near the socket of 16 A.
Due to safety reasons, the socket must be connected to the ground.
Before connecting the plug to the socket, please check that the voltage marked on
the unit plate matches the voltage of the socket.
5.3 CO
The CO
one, the nearest to the cylinder, has to indicate the pressure of the gas
inside it, and it must be checked often in order to avoid exhausting
the CO
reducer in order to maintain the pressure between 0.5 and 1.5 bar.
Connect the CO
(6) using the supplied hose.

6 Technical Features

Overall dimensions (cm):
height
width
length
Chamber dimensions(cm):
height
width
length
Capacity of shelves:
Capacity (litres):
Incubation power (W):
Sterilization power (W):
Weight (kg):
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 16
Connection
2
cylinder must be equipped with two pressure gauges. The first
2
during work. The second one must be adjusted by a pressure
2
cylinder through a gas reducer to the rear part inlet
2
Tel 34 93 770 08 77 Fax 34 93 770 23 62
89
64
60
65
50
46
9
150
1100
2025
110