Honda UMK425T Manual De Propietario página 35

9.Check the gear case
• For safety, check the gear case for wear and damage before starting
the engine.
CAUTION:
Wear heavy gloves to protect your hands, when working around the
gear case.
Inspect the gear case:
1.Stop the engine with the engine switch to the OFF position.
2.Check if there is grass or thread tangled between the grass guard
and nylon-line cutting head. If there is, remove it.
3.After removing grass or thread, check if there is contaminated
material such as mud or dirt in between the grass guard and
nylon-line cutting head. If there is, remove the nylon-line cutting
head and clean the gear case (see page 52, 53). When cleaning,
perform "Inspect the grass guard wear" (see page 33) and "Inspect
the drive bolt" (see page 34) at the same time.
GEAR CASE
NYLON-LINE CUTTING HEAD
32
GRASS GUARD
BLADE HOLDER
NYLON-LINE CUTTING HEAD
GEAR CASE