5.Grass deflector replacement
• Install the grass deflector in the proper position securely to protect you
from the debris that are thrown from a wheeling cutting attachment.
CAUTION:
Wear heavy gloves to protect your hands, when working around the
cutting attachment.
Installation position of grass deflector
1. Place the grass deflector in a position that allows it to touch the gearbox.
2.Remove the grass deflector mounting bolts, and then remove the
grass deflector.
3. Place the protector holder on new grass deflector and align the bolt holes.
4.Keep the grass deflector position and direction same as below.
Make sure the protector holder to the position of the 5 mark of the label.
5.Tighten the bolts securely. Torque the bolts to:
5.9 – 7.8 N∙m (0.60 – 0.80 kgf∙m)
GRASS DEFLECTOR
MOUNTING BOLTS (2)
GRASS DEFLECTOR
mark of the label
PROTECTOR HOLDER
57