Setting Up Anynet; Switching Between Anynet+ Devices - Samsung 5 Serie Manual Del Usuario

Setting Up Anynet

Anynet (HDMI-CEC) Setup
+
❑
Press the TOOLS button to display Tools menu.
T
You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).
Anynet (HDMI-CEC) → Off / On
+
„
To use the Anynet Function, Anynet
+
When the Anynet (HDMI-CEC) function is disabled, all the Anynet+ related
N +
operations are deactivated.
Auto Turn Off → No / Yes
„
Setting an Anynet Device to turn Off Automatically when the TV is Turned Off
+
The active source on the TV remote must be set to TV to use the Anynet+ function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when
N
the TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet+ Devices

1. Press the TOOLS button. Press the ENTER E button to select Anynet
2. Press the ▲ or ▼ button to select Device List, then press the ENTER E button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you
N
want, press the red button to scan for devices.
Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List
N
menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTER E
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
If you have selected external input mode by pressing the
N
switch to an Anynet+ device by using the Device List.
Anynet Menu
+
❑
The Anynet menu changes depending on the type and status of the Anynet
+
Anynet Menu
+
View TV
Device List
(device_name) MENU
(device_name) INFO
Record: (*recorder)
(*recorder) Reserve Recording
Stop Recording: (*recorder)
Receiver
+
(HDMI-CEC) must be set to On.
+
Description
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu
of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that support the
recording function.)
Enables reserving a recording for the recorder. (This is only available for devices that support the
recording reservation function.)
Stops recording.
Sound is played through the receiver.
English - 36
+
(HDMI-CEC).
SOURCE button, you cannot use the Anynet+ function. Make sure to
devices connected to the TV.
+
Media Play (USB)
Anynet (HDMI-CEC)
+
Setup
Anynet+ (HDMI-CEC) : ON
No
Auto Turn Off : Yes
Yes
Move Enter
U E
View TV
Device List
Record : DVDR
DVDR MENU
DVDR INFO
Receiver : On
Setup
Move Enter
U E
Continued...
►
Return
R
Return
R