Dell PowerEdge C6220 II Manual Del Usuario página 6

Pus h on t he lat ch releas e buttons on the midpoints of t he end piece t o
1
open the rail latches. See F igure 1.
Align t he end pieces of the rails on the vertical rack flanges to s eat
2
the p egs in the bottom hole of the first U and the top hole of the
second U.
NOTE : The rails can be used in both square-hole (item 1 in the following figure)
and round-hole racks (item 2 in the following figure).
Figure 1. Pus hi ng the Latch Rel eas e Buttons
NOTE : To remove the rail s , push on the latch release button on the midpoints
of the end piece and unseat each rail.
Getting Started With Your System | 4