Barrette Elite 73013137 Instrucciones De Instalación página 10

A R I
NGLED AIL NSTALLATION
1 1
Closely follow post installation instructions.
2 2
*
Make sure base trim is installed
Install angle brackets
a. With base trim installed on bottom of post, unroll
paper install template and tape to post, ensuring
the bottom of the template rests on the top of the the bottom of the template rests on the top of the
base trim. Predrill through all marked locations on
installation template "A" (not "L") into aluminum post installation template "A" (not "L") into aluminum post
with a ⁄ ⁄ ⁄ " drill bit. Do this for all marked locations ⁄ " drill bit. Do this for all marked locations
9 9 9
64 64
for both top and bottom brackets.
b. Install the angle brackets at the respective heights
instead of line brackets. NOTE: The base of the
angled bracket installs horizontally in orientation
(screws beside each other)
c. Attach top and bottom bases to posts with
#10 x 1 ⁄ ⁄" fl at head screws provided (2 per bracket). ⁄ " fl at head screws provided (2 per bracket).
1
2 2 2 2
10