Mounting Space; Parts Included; Optional Accessories - GE Energy Star JVE40 Manual Del Usuario

DAMAGE-SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.

MOUNTING SPACE

66" or
more from
the floor to
the top of
the hood
NOTES:
• This range hood is for installation over ranges up to 30"
wide.
• If you are going to vent your range hood to the outside,
see the "Ducting Requirements" section for exhaust duct
preparation.
8
Installation Instructions
Bottom edge of
cabinet needs
to be 30" or
more from
the cooking
surface
30"
min.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
Saw (saber or
keyhole)
1/4" pivoting
Pliers
hex socket
Flashlight Caulking

PARTS INCLUDED

PART
Metal Grease Filters
Mounting Screws
Exhaust Adaptor/Damper
" x 10" rect. venting)
(for 3
1 4
Exhaust Adaptor Screws

OPTIONAL ACCESSORIES

This kits can be ordered from your GE supplier.
Charcoal Filters If recirculating
order Kit no. WB02X11000
Note: If the hood is installed for recirculation mode,
it is not E S certified.
®
NERGY TAR
Pencil
Duct tape
Electric drill Metal snips
(in some
applications)
Tape measure Wire stripper
Level
1/4" Nutdriver
QUANTITY
2
4
1
1
49-80622-5