Connecting The Display; When Connecting A Dvi-D Connector Compatible Display; When Connecting A Monitor Connector Compatible Display; Changing The Display Settings - Sony VAIO VGP-UPR1 Manual Del Usuario

Connecting the display

Notes
To connect a display to the product, install the

dedicated software (see the instruction manual
supplied with your product).
This product has two connectors, the MONITOR

connector and the DVI-D connector, for display
connection. The connector to use depends on the type
of display. For information, refer to the instruction
manual of the display.
The DVI-D connector and the MONITOR connector

cannot be used simultaneously.
When a personal computer is connected, a maximum

of two screens can be displayed, including the LCD of
the personal computer.
The maximum output resolution of the product is

1680 × 1050. However, depending on the connected
display, images may be displayed in lower resolution.
Depending on the software you use, the contents may

not appear correctly on the connected display.
Output from the product will be usable through

Extended Desktop Mode.

Hint
The connected display will be identified as the third
display in the Windows "Display Settings" screen.
(Windows Vista)
When connecting a DVI-D
connector compatible display
1
Insert the display cable into the DVI-D
connector of the product.
Note
The DVI-D connector of this product does not comply

to the requirements of HDCP (High-bandwidth
Digital Content Protection).
When connecting a MONITOR
connector compatible display
1
Insert the display cable into the
MONITOR connector of the product.
4
GB

Changing the display settings


On resolution
This product supports the following resolutions.

800 × 600, 1024 × 768, 1280 × 768, 1280 × 1024, 1360 ×
768, 1400 × 1050, 1440 × 900, 1600 × 1200, 1680 × 1050
All the resolutions may not be supported depending

on the connected display. Depending on the output
resolution, images may not be displayed normally.
Select a resolution that can be displayed normally
(Depending on the display, changing the refresh rate
may be necessary).
When using Windows 7
You can change the display settings on the "Screen
Resolution" screen. (To display the "Screen
Resolution" screen, right-click on the desktop and
select "Screen Resolution" on the displayed menu.)
When using Windows Vista
A menu will appear when the
taskbar is right-clicked. Settings for connected
displays can be made from this menu.
Setting options Explanation
Screen Changes the screen resolution
Resolution of the connected display.
Changes the color of the
Color Quality
connected display.
Changes the screen position of
Movement
the connected display and the
Zone
personal computer.
Extended Changes the extended desktop
Desktop setting.
Invalidates the extended
Off
desktop.
Displays the Windows
Advanced...
"Display Setting" screen.
icon on the