Connecting The Microphone; Restrictions - Sony VAIO VGP-UPR1 Manual Del Usuario

Connecting the
microphone
You can use the microphone by connecting it to
the MIC connector of this product.
Note
While the product is connected to a personal

computer, the settings may change to activate the MIC
connector of this product. To activate the microphone
connector of the personal computer, follow the
procedure below.
1
Right-click the
then select the recording device.
The "Sound" screen appears.
2
From the displayed recording devices,
select a device other than
"Microphone C-Media..., " and click
"Set Default. "
3
Click "OK. "
The setting change is complete, and the
microphone connector of the personal
computer will activate.
The microphone volume of this product may be set to

mute. In this case, change the volume level according
to your preference.
1
Right-click the
then select the recording device.
The "Sound" screen appears.
2
From the displayed recording device,
select "Microphone C-Media..., " and
click "Properties. "
"Microphone Properties" appears.
3
Select the "Levels" tab and set the
microphone volume according to your
microphone.

GB
icon on the taskbar,
icon on the taskbar,

Restrictions

When a personal computer is connected, a

maximum of two screens can be displayed,
including the LCD of the personal computer.
Do not use the product in the following ways:

– Simultaneous usage of the MONITOR and
DVI-D connectors of this product.
– Simultaneous usage of the product's display
output and the personal computer's exterior
display output.
The LAN connector of this product does not

support Network boot or Wake-on-LAN. When
you want to use the Network boot or Wake-on-
LAN features, use the LAN connector of your
personal computer.
Depending on the instant mode, types of

software or data, etc., the sound may not output
from the HEADPHONES connector.
The product does not support Windows Aero.

When a display is connected to the product, the

extended desktop mode will be set. Clone mode
(mirror mode) is not supported.
When multiple USB devices are connected, as a

characteristic of the USB, CPU load of the
personal computer may increase, resulting in a
decrease in software speed or printing speed of
the USB printer.
Playback of movies on the external display is

not supported. It is not supported even if the
display is connected as the primary monitor.
Movie playback and software that requires 3D

processing are not supported on the display
connected to this product.
The maximum bit and sampling rate of the

headphones output is 16 bits, 48 KHz.
In the case of certain models, when using the

"WinDVD" software, a connected display to
this product will not output images.
When starting or restoring Windows, a sound

to notify the device connection/disconnection
may sound. This is not a malfunction.