Technical Data - Hilti UH 650 Manual De Instrucciones

Rotary drilling in metal
Rotary drilling in softwood
Rotary drilling in hardwood
Hammer drilling in masonry
Hammer drilling in stone
Use only the insert tools and accessories listed for use
with the tool.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance. The
tool and its ancillary equipment may present hazards
when used incorrectly or when used not as directed.
4.2 Chuck
– Quick-release chuck or
– Key-type chuck with key
4.3 Switches
– On/off switch with electronic speed control
– Lockbutton for sustained operation
– Function selector switch
– 2-speed gear selector switch
– Forwards/reverse switch
4.4 Grip
– Adjustable (pivoting) side handle with depth gauge
– Vibration-absorbing grip

5. Technical data

Electric tool
Rated power input
Rated voltage
Rated current
Mains frequency
Weight of tool
Dimensions (L x W x H)
Speed under no load
Hammering speed
Chuck
Max. torque
Speed control
Forwards/reverse
Double insulated
Right of technical changes reserved!
Printed: 07.07.2013 | Doc-Nr: PUB / 5071287 / 000 / 00
Drill bits with cylindrical shank, 1.5–13 mm dia.
"– ")
1 1
( / /
16 2
Twist drills up to 30 mm dia.(1
Forstner drill bits up to 35 mm dia.(1
Hole saws up to 68 mm dia.(2
Twist drills up to 24 mm dia.(
Forstner drill bits up to 25 mm dia.(1")
Drill bits with cylindrical shanks, 3–16 mm dia.
"– ")
1 5
( / /
8 8
Drill bits with cylindrical shanks, 3–8 mm dia.
"– ")
( 1 / 3 /
8 8
4.5 Items supplied as standard
– The electric tool
– Side handle
– Depth gauge
– Dust shield
– Chuck (quick-release chuck or key-type chuck)
– Operating instructions
– Toolbox or cardboard box (depending on version)
See figure and the explanations of operating controls
and parts on page 1.
5.2 lbs (2.3 kg) with chuck and side handle
13 x 3 x 8 in (330 x 77 x 200 mm)
1 st gear 1100 r.p.m.
2 nd gear 3100 r.p.m.
48.000/min.
1 / "– 1 / " (1.5–13 mm) dia.
16 2
1 st gear 22 lb ft (30 Nm)
2 nd gear 9 lb ft (12 Nm)
Electronic control switch (on/off switch)
Selector lever, interlock prevents switching when running
Protection class II Z
")
1 /
8
")
3
/
8
")
1 /
2
")
7 /
8
UH 650
730 W
120 V
6.5 A
60 Hz
en
5