Basic Safety Instructions; Handling The Instrument - Seca 675 Manual De Instrucciones

2.2 Basic safety instructions

Handling the instrument

• Please take note of the information in these instruc-
tions for use.
• Keep the instructions for use in a safe place. The
instructions for use are a component of the device
and must be available at all times.
DANGER!
Risk of explosion
Do not use the device in an environment in
which one of the following gases has accumu-
lated:
►
oxygen
►
flammable anesthetics
►
other flammable substances/air mixtures
CAUTION!
Patient hazard, damage to device
►
Additional devices which are connected to
electrical medical devices must provide evi-
dence of compliance with the relevant IEC or
ISO standards (e.g. IEC 60950 for data-pro-
cessing devices). Furthermore, all configura-
tions must comply with the requirements of
standards for medical systems (see IEC
60601-1-1 or Section 16 of the 3rd edition of
IEC 60601-1 respectively). Anyone connect-
ing additional devices to electrical medical
devices is considered a system configurer
and is therefore responsible for ensuring that
the system complies with the requirements of
standards for systems. Your attention is
drawn to the fact that local laws take prece-
dence over the above-mentioned require-
ments of standards. In the event of any que-
ries, please contact your local specialist
dealer or Technical Service.
►
Have servicing and recalibration carried out
regularly as described in the relevant section
of this document.
►
Technical modifications may not be made to
the device. The device does not contain any
parts for servicing by the user. Only have ser-
vicing and repairs performed by an authorized
seca service partner. You can find service
partners in your area at www.seca.com or by
sending an e-mail to service@seca.com.
English
Safety information • 47